18650 cylindrical battery laser peeling machine
2015-02-12
The SHINHOP automatic laser peeling machine for 18650 cylindrical batteries produced in recent years is developed and manufactured to meet the demands of market development, based on practical industrial application experience. The product has stable performance, high work efficiency, and convenient maintenance. Since its launch, it has attracted the attention and introduction of many users. We welcome users to visit the factory for discussions.
Introduction to the working principle of the SHINHOP 18650 cylindrical battery automatic laser peeling machine:
Applicable products include: 18650 cells, 26650, cylindrical mobile power batteries, automotive power batteries, and other cylindrical cell peeling.
This equipment is mainly an automatic laser peeling loading and unloading device for new energy power batteries, which primarily uses laser technology for peeling cylindrical cells.
The workflow is as follows:
1. The operator places the cells onto the feeding conveyor belt, and the robotic arm grabs the cells and transfers them to the peeling section conveyor belt. The choice of which conveyor belt to use depends on the production speed, and the cells enter the peeling fixture through the conveyor belt.
2. When the battery enters the laser clamp for cutting and rotation, the clamping structure holds the cell in place while the laser cuts the skin of the cell. After the skin is cut, the robotic arm grabs the peeled-off waste material, which we refer to as waste.
3. The peeled cells are automatically sent out from the discharge conveyor belt, and the operator can directly collect and box them.
Working principle:
The principle of laser peeling is that the cell remains stationary while being transported to the laser peeling opening by a stepper motor. The laser is in a high-speed rotating state and cuts the outer skin of the cell, with a cutting precision of 0.1MM. This equipment has a capacity of about 5000-8000 units per hour in a three-channel setup, so this peeling structure and speed can basically meet the needs of most customers in the current market. The loading and unloading at both ends of the equipment can be automated and adjusted based on cost, whether manual or automatic loading and unloading functions.
Features of the SHINHOP 18650 cylindrical battery automatic laser peeling machine:
1. High laser power, with options for 10W, 30W, 50W, 100W, etc. The power is controlled by software and can be continuously adjusted;
2. Low processing cost, no need for any consumables. Large marking range. Clear marking, not easily worn, and high marking and cutting efficiency;
3. Easy control of engraving depth;
Technical advantages of SHINHOP laser peeling machine:
1. Uses a fully enclosed RF laser, with a long lifespan (20000-30000 hours), and stable beam;
2. Good beam quality, stable output, low failure rate. CO2 series models can also be used in conjunction with production lines and automated production line equipment;
3. Powerful software functions, compatible with files from Coreldraw, AutoCAD, Photoshop, etc.; supports PLT, PCX, DXF, BMP, and can directly use SHX, TTF font libraries;
4. Supports automatic coding, printing serial numbers, batch numbers, dates, barcodes, QR codes, automatic skipping of numbers, etc.;
Main technical parameters (non-standard customization, based on actual needs):
Overall dimensions: 1350*1220*1700MM (L*W*H);
Input voltage: AC—220V 50Hz or AC—380V 50Hz optional;
Maximum power of the whole machine: 0.9K W (at 220V);
Input air source pressure: 0.4-0.6 Mpa;
Air consumption: 1.5 L/min;
Production efficiency (C/T): ≤1.0 S/per unit;
Equipment utilization rate: ≥95%; Processing method: automatic detection, automatic peeling, automatic discharge;
Material change method: manual feeding.
About Us
Shenzhen SHINHOP Laser Equipment Co., Ltd. It is a scientific and technological enterprise specializing in the research and development, production and sales of industrial laser processing equipment. It has been deeply engaged in the new energy industry for 20 years, focusing on the non-standard customization of automatic lithium battery cell assembly line and module PACK production line. It has successively obtained the national high-tech and specialized new enterprise certification.
Contact Us
Company Address：Building 6, Jingneng Science and Technology Environmental Protection Industrial Park, No.3 Baolong 2nd Road, Longgang District, Shenzhen City, Guangdong Province
Customer service hotline:18898357350
Customer service E-mail:info@shinhop.com
Related News
2026-06-11
Contact Details
Hotline
Address
Building 4, Jingneng Technology and Environmental Protection Industrial Park, 3 Baolong 2nd Road, Longgang District, Shenzhen, Guangdong Province，China
YouTube
TikTok